Seat Base

Seat Base

Removal
1. Remove the front seat control switch.
2. Remove the front seat backrest hinge inner trim panel.







3. Remove the front seat backrest inner trim panel.







4. Detach the front seat backrest trim panel.
1. Detach the front seat backrest trim panel retaining clips.
2. Detach the front seat backrest trim panel.







5. Remove the front seat backrest trim panel.
- Disconnect the rear passenger footwell courtesy lamp electrical connector.







6. Detach the front seat cushion cover.







7. Detach the front seat cushion cover retaining hooks.







8. Detach the front seat cushion cover retaining strap.







9. Disconnect the front seat cushion heater pad electrical connector.







10. Remove the front seat cushion and cushion cover assembly.







11. Remove the front seat backrest outer trim panel.







12. Detach the seat base wiring harness.







13. Disconnect the electrical connectors.







14. Remove the front seat belt buckle.







15. Detach the front seat cushion heater pad electrical connector.







16. Disconnect the seat base runner motors electrical connectors.







17. Detach the driver seat module retaining bracket.







18. Disconnect the seat base height adjustment and cushion extend motors electrical connectors.







19. NOTE:
- Do not remove or carry out any repairs to the anti-whiplash system (AWS) on the front seat back.
- In the event of the AWS operating, there are no serviceable components.
- Right-hand shown, left-hand similar.

Remove the seat base.
- Remove the front seat backrest retaining bolts.







Installation

1. NOTE:
- Do not remove or carry out any repairs to the anti-whiplash system (AWS) on the front seat back.
- In the event of the AWS operating, there are no serviceable components.

To install, reverse the removal procedure.
- Tighten to 25 Nm.







2. Tighten to 35 Nm.