A-Pillar Trim Panel

A-Pillar Trim Panel

Removal

1. NOTE: Left-hand shown, right-hand similar.

Detach the door aperture weatherstrip.







2. NOTE:
- Cut the C-pillar trim panel retaining strap.
- Left-hand shown, right-hand similar.

Detach the A-pillar trim panel.







3. Remove the A-pillar trim panel.
- Disconnect the occupancy position sensor electrical connector.







Installation

1. WARNING: The retaining strap is a safety critical item and must be replaced to prevent the trim detaching in the event of the side curtain airbag deployment.

NOTE: When installing the new retaining strap and rivet make sure the old clip has been removed from the body before pressing the trim into place.

To install, reverse the removal procedure.