Transmission Mount: Service and Repair

Transaxle Support Insulator (37.16.42)

Special Service Tools:

Removal
1. Raise and support the vehicle.
2. Install the special tool.





3. NOTE: Left-hand shown, right-hand similar.

Position and adjust the special tool rear height adjuster.





4. NOTE: Right-hand shown, left-hand similar.

Position and adjust the special tool front height adjuster.





5. Position and adjust the special tool engine height adjusters.





6. Detach the support bar.





7. Remove the support bar.





8. Remove the spacer.





9. Remove the transaxle support insulator.
Remove the transaxle support insulator retaining nuts.





Installation
1. To install, reverse the removal procedure.
Tighten to 47 Nm.





2. Tighten to 133 Nm.





3. Tighten to 25 Nm.