Fluid Line/Hose: Service and Repair

Transmission Fluid Cooler Tubes (44.24.19)

Removal

WARNING: Whenever releasing the transmission cooling system fluid, take care to prevent fluid scalding. Failure to follow these instructions may result in personal injury.

1. Remove the undertray.

2. NOTE: Lower transmission fluid cooler tube shown, upper similar.

NOTE: Allow the fluid to drain into a suitable container.

Detach the transmission cooler tube.
1. Install the special tool.
2. Detach the transmission cooler tube.





3. NOTE: Lower transmission fluid cooler tube shown, upper similar.

Remove the transmission fluid cooler tube.
Remove and discard the sealing washers.





Installation

1. NOTE: Lower transmission fluid cooler tube shown, upper similar.

To install reverse the removal procedure.
Install new sealing washers.
Tighten to 35 Nm.





2. CAUTION: Use of any transmission fluid other than the recommended fluid, will cause transmission damage.

Carry out a transmission fluid level check.