Wiper Pivot Arm - Vehicles Built Up to: 01/2004

Wiper Pivot Arm - Vehicles Built Up To: 01/2004






Special Service Tools







Removal
1. Remove the wiper pivot arm retaining nut cover.






2. Remove the wiper pivot arm retaining nut.


NOTE: Left-hand shown, right-hand similar.






3. Using the special tool, remove the wiper pivot arm.



Installation






NOTE: Make sure the wiper pivot arm is correctly aligned with the alignment mark on the windshield.


1. To install, reverse the removal procedure.
- Tighten to 17 Nm.