Pinpoint Test G189148P4 : The Roof Opening Panel Does Not Stop Flush From Any Position

PINPOINT TEST G189148p4 : THE ROOF OPENING PANEL DOES NOT STOP FLUSH FROM ANY POSITION

G189148t9 : CHECK THE ROOF OPENING PANEL ALIGNMENT

1. Check the roof opening panel alignment.

- Is the roof opening glass adjusted correctly?

-> Yes GO to Pinpoint Test G189148t10.

-> No ADJUST the roof opening glass as necessary
TEST the system for normal operation.

G189148t10 : CHECK THE ROOF OPENING PANEL WEATHERSTRIP

1. Inspect the roof opening panel weatherstrip for looseness, damage and correct installation.

- Is the roof opening panel weatherstrip OK and installed correctly?

-> Yes GO to Pinpoint Test G189148t11.

-> No REPAIR or INSTALL a new roof opening panel weatherstrip as necessary.
TEST the system for normal operation.

G189148t11 : CHECK FOR OBSTRUCTION IN THE ROOF OPENING PANEL

1. Inspect the roof opening panel assembly for obstructions in the frame.

- Are any obstructions found?

-> Yes REMOVE the obstruction. If necessary, INSTALL a new roof opening panel frame.
TEST the system for normal operation.

-> No INSTALL a new roof opening panel control module.
TEST the system for normal operation.