Toe Adjustment

Front Toe Adjustment
1. Start the engine and center the steering wheel.
2. Turn the engine off, and hold the steering wheel in the 'straight ahead' position by attaching a rigid link from the steering wheel to the brake pedal.
3. Check the toe settings. Follow the equipment manufacturer s instructions.





4. NOTE: Left-hand shown, right-hand similar.

Loosen the tie-rod end lock nut .
^ Clean and lubricate the lock nut and tie-rod threads.





5. NOTE: Do not allow the steering gear boot to twist when the front tie-rod is rotated.

NOTE: Left-hand shown, right-hand similar

Rotate the tie-rod to adjust the toe setting.





6. NOTE: Make sure the tie-rod does not rotate.

NOTE: Left-hand shown, right-hand similar.

Tighten the tie-rod end lock nut .
1. Tighten to 100 Nm.
7. Recheck the toe settings. Follow the equipment manufacturer s instructions.

Rear Toe Adjustment
1. Check the toe settings. Follow the equipment manufacturer s instructions.





2. NOTE: Left-hand, shown right-hand similar.

Loosen the lock nut.
^ Clean and lubricate the lock nut and toe link threads.





3. Rotate the toe link to adjust the toe settings.





4. Tighten the lock nut.
5. Check the toe settings. Follow the equipment manufacturer's instructions.