Transmission Mount: Service and Repair

Support Insulator





Special Service Tools

Removal
1. Raise and support the vehicle.





2. Install the special tool.





3. NOTE: Left-hand shown, right-hand similar.

Position and adjust the special tool height rear adjuster.





4. NOTE: Right-hand shown, left-hand similar.

Position and adjust the special tool front height adjuster.





5. Position and adjust the special tool engine height adjusters.





6. Detach the support bar.





7. Remove the support bar.





8. Remove the spacer.





9. Remove the transmission mount.
Remove the transmission mount retaining nuts.

Installation





1. Install the transmission mount.
Tighten to 47 Nm.





2. Install the spacer.





3. Install the support bar.

Tighten to 133 Nm.





4. Tighten to 25 Nm.





5. Remove the special tool.
6. Lower the vehicle.