Throttle Body: Service and Repair

Throttle Body

Removal

CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate has a special coating applied during manufacture which should not be removed.

1. Remove the air cleaner outlet pipe.










2. Disconnect the electrical connector.







3. Remove the throttle body.







4. Remove and discard the O-ring seal.

Installation

CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate has a special coating applied during manufacture which should not be removed.







1. NOTE:
- To install, reverse the removal procedure.
- Install a new O-ring seal.







2. Tighten to 10 Nm.