Seat Bladder: Service and Repair

Lumbar Assembly

Removal
1. Remove the front seat backrest.
2. Remove the head restraint.
- Press the tangs.







3. Detach the backrest cover.
- Detach the retaining strip.







4. Detach the backrest cover tension cords from the backrest.







5. Detach the backrest cover.
- Cut the hog rings.







6. Detach the backrest cover.
- Cut the hog rings.







7. Detach the backrest cover.
- Cut the hog rings.







8. Roll the backrest cover up the backrest.







9. Detach the lumbar motor from the seat backrest frame.
- Cut the cable ties.







10. Remove the lumbar assembly.
- Cut the cable ties.







Installation

NOTE: Install new cable ties and hog rings. Use hog ring pliers to close the hog rings. Do not use any other tool. The hog rings must be closed to overlap as illustrated.

1. To install, reverse the removal procedure.