G240070T25

E : DTC P1243

G240070t25 : CHECK THE ACCELERATOR PEDAL DEMAND SENSOR GROUND CIRCUIT
1. Disconnect the ECM electrical connector PI 1 and the accelerator pedal electrical connector CA 88.
2. Measure the resistance between PI 1 pin 19 (BG) and CA 88 pin 6 (BG).
3. Measure the resistance between PI 1 pin 20 (BG) and CA 88 pin 3 (BG).

- Is the resistance less than 5 ohms?

-> Yes
DIAGNOSE the electronic engine control system.

-> No
REPAIR the accelerator pedal demand sensor ground circuit from the accelerator pedal to the ECM. CLEAR the DTC. TEST the system for normal operation.