Clutch: Service and Repair

Disc and Pressure Plate





Special Service Tools

Removal
1. Remove the manual transmission.





2. Remove the clutch disc and pressure plate.
Remove the pressure plate bolts in a uniform sequence.

Installation





1. NOTE: The clutch disc is marked "Transmission side" for correct installation.

Using the special tool, align the clutch assembly.





2. Locate the clutch pressure plate on the flywheel dowels and tighten the bolts progressively in a diagonal sequence.

Tighten to 25 Nm.

3. Remove the special tool.

4. NOTE: Make sure that the input shaft of the transmission is moved squarely into the hub of the clutch disc. Do not bend in any direction.

Install the manual transmission.





Lubricants, Fluids, Sealers and Adhesives