Fluid Line/Hose: Service and Repair

Transmission Fluid Cooler Tubes

Removal
Whenever releasing the transmission cooling system fluid, take care to prevent fluid scalding. Failure to follow these instructions may result in personal injury.
1. Remove the undertray.





2. NOTE: Lower transmission fluid cooler tube shown, upper similar.

NOTE: Allow the fluid to drain into a suitable container.

Detach the transmission cooler tube.
1. Install the special tool.
2. Detach the transmission cooler tube.





3. NOTE: Lower transmission fluid cooler tube shown, upper similar.

Remove the transmission fluid cooler tube.
Remove and discard the sealing washers.

Installation





1. NOTE: Lower transmission fluid cooler tube shown, upper similar.

To install reverse the removal procedure.
Install new sealing washers.
Tighten to 35 Nm.

2. CAUTION: Use of any transmission fluid other than the recommended fluid, will cause transmission damage.

Carry out a transmission fluid level check.