Air Bag Control Module: Service and Repair

76.73.48

Restraints Control Module (RCM)

Removal
1. Disconnect the battery ground cable.

CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result.

NOTE: Repair is made by replacement only. If a part is replaced and the new part does not correct the condition, install the original part and carry out the diagnostic procedure again.

2. Remove the center console.







3. Disconnect the RCM electrical connectors.







4. Remove the RCM.

Installation







1. To install, reverse the removal procedure.
- Tighten to 12 Nm.

NOTE: Make sure to tighten the retaining bolts to the correct specification.