Fuel Rail: Service and Repair

Fuel Injection Supply Manifold

Removal

All vehicles
1. Disconnect the battery ground cable.
2. Disconnect the spring lock coupling.

Vehicles with 2.5L or 3.0L engine
1. Remove the fuel injectors.

Vehicles with 2.5L or 3.0L engine







1. Remove the fuel pressure sensor.
- Remove and discard the gasket.

Installation

All vehicles
1. To install, reverse the removal procedure.
- Lubricate the fuel injector O-ring seals with clean engine oil.

NOTE: Install new fuel injector O-ring seals.

Vehicles with 2.5L or 3.0L engine







1. Tighten to 10 Nm.

NOTE: Install a new gasket.