OBD II

OBD II Monitoring Conditions:

When testing for OBD II DTC reoccurrence, it can be determined if the Service Drive Cycle was of sufficient length by performing a PDU "Systems Readiness Test".
The Systems Readiness Test is accessed via the PDU menu structure.

Further confirmation of the System Readiness Test status is available by retrieving the logged DTCs.
- If DTC P1000 is logged in memory, the on-board diagnostic tests have not been completed.
- If DTC P1111 is logged in memory, all on-board diagnostic tests have been completed.

Refer to "Key to Column Headings" for important information regarding the use of DTC Summaries.