Monostrut Bush

Monostrut Bush 64.25.13

Special Service tools




Adaptor Ring 204-116-01 (JD 143-1)




Anvil Adaptor 204-116-02 (JD 143-2)




Remover/Replacer Adaptor 204-116-08 (JD 143-8)




Differential Strut - Bush Replacer 204-201 (JD 241)

Removal

CAUTION:
Replacement of nuts and bolts: Various thread-locking devices are used on nuts and bolts throughout the vehicle. These devices restrict the number of times a nut or bolt can be used.

1. Remove monostrut from vehicle.




2. Using a hydraulic press remove bush from monostrut.
^ Using special tools, support monostrut on the press bed.
^ Position special tool on top of bush and align tool with press ram.
^ Press bush from monostrut.
3. Clean relevant parts.

Installation




1. Using a hydraulic press, fit bush into monostrut.
^ Support the bush-bore of the monostrut between plates on the press-bed.
^ Position bush to bore.
^ Position special tool on top of bush and align tool with press ram.
^ Press bush into monostrut.
2. Install monostrut on vehicle.