Throttle Body: Service and Repair

Throttle Body

Removal

1. CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate has a special coating applied during manufacture which should not be removed.

Remove the air outlet tube.







2. Disconnect the throttle position sensor electrical connector.







3. Disconnect the throttle body actuator electrical connector.







4. Remove the support bracket.
- Detach the wiring harness from the bracket.







5. Remove the throttle body.

Installation







1. CAUTION: Do not attempt to clean the throttle body. The bore and the throttle plate has a special coating applied during manufacture which should not be removed.

To install, reverse removal procedure.
- Install a new throttle body gasket.