Header Rail
Header Rail Weatherstrip
Removal
1. Power the convertible top to the fully lowered position.
2. Remove the header rail weatherstrip right-hand retaining screw.
3. Detach the header rail weatherstrip right-hand upper retaining clip.
4. Detach the header rail weatherstrip right-hand lower retaining clips.
5. Detach the header rail weatherstrip from the right-hand locating channel.
6. Remove the header rail weatherstrip right-hand locating channel.
7. NOTE: Note the position of the header rail weatherstrip right-hand insulator.
Remove and discard the header rail weatherstrip right-hand insulator.
8. NOTE: Note the position of the header rail weatherstrip right-hand locating channel insulator.
Remove and discard the header rail weatherstrip right-hand locating channel insulator.
9. Remove the header rail weatherstrip left-hand retaining screw.
10. Detach the header rail weatherstrip left-hand upper retaining clip.
11. Detach the header rail weatherstrip left-hand lower retaining clips.
12. Detach the header rail weatherstrip from the left-hand locating channel.
13. Remove the header rail weatherstrip left-hand locating channel.
14. NOTE: Note the position of the header rail weatherstrip left-hand insulator.
Remove and discard the header rail weatherstrip left-hand insulator.
15. NOTE: Note the position of the header rail weatherstrip left-hand locating channel insulator.
Remove and discard the header rail weatherstrip left-hand locating channel insulator.
16. NOTE: Note the position of the header rail weatherstrip.
Remove the header rail weatherstrip from the header rail.
Installation
1. CAUTION: Make sure all adhesive has been removed from the insulator mating surfaces.
NOTE:
- Install the header rail weatherstrip to the position noted during removal.
- Install new header rail weatherstrip locating channel insulators to the positions noted during removal.
- Install new header rail weatherstrip insulators to the positions noted during removal.
To install, reverse the removal procedure.