Inner Headlamp Bulb

Inner Headlamp Bulb

Removal
1. Open hood and install fender cover.







2. Release headlamp bulb holder locking tangs and remove holder from headlamp.


3. CAUTION: If the bulb is to be re-fitted, the glass must not be touched with the bare hand. Failure to observe this caution will result in premature bulb failure


Position bulb holder for access and remove bulb.

Installation


1. CAUTION: Headlamp bulbs are of the halogen type and must not be handled with bare hands. Failure to observe this caution will result in premature bulb failure.


Install headlamp bulb in holder.

2. Install bulb holder in headlamp ensuring that securing tangs are fully seated.
3. Remove fender cover and close hood.