Rear Door Glass Lift Switch/Ashtray Assembly

REAR DOOR GLASS LIFT SWITCH/ASHTRAY ASSEMBLY

Removal
1. Remove casing/armrest assembly from door.
2. Remove armrest from casing.






3. Position armrest for access, slacken and remove two switchpack securing screws and remove switchpack assembly from armrest.







4. Slacken and remove screws securing veneer panels to switch and ashtray.

Installation
1. Position veneer panels on switch and ashtray, and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten securing screws.
3. Fit armrest to door casing. Service and Repair
4. Fit casing/armrest assembly to door. Service and Repair