Rear Door Glass Lift Switch/Ashtray Veneer Panels

Removal
1. Remove door casing veneer panel. [1][2]Procedures
2. Remove door casing. [1][2]Procedures
3. Remove door armrest and remove switch/ashtray assembly from armrest. [1][2]Procedures





4. Slacken and remove screws securing veneer panels to door glass switch/ashtray assembly.
5. Remove veneer panels from switch/ashtray assembly.


Installation
1. Position veneer panel over switch/ashtray assembly and fit and tighten securing screws.
2. Position switch/ashtray assembly on armrest and fit and tighten the two securing screws.
3. Fit armrest to door casing. [1][2]Procedures
4. Fit casing to door. [1][2]Procedures