Ignition Coil: Service and Repair

Ignition Coil-On-Plug

Removal

Left and Right-Hand Bank

1. Disconnect the battery ground cable.







2. Remove the engine cover.

Left-Hand Bank

3. Remove the evaporative emission canister purge valve.
4. Remove the oil level indicator.







5. Detach the power assisted steering fluid reservoir.







6. Unclip the engine breather hose.

Right-Hand Bank

7. Remove the air intake tube.

Left and Right-Hand Bank







8. NOTE: Left-hand bank shown, right-hand similar.

Remove the ignition coil cover.







9. Disconnect the ignition coil electrical connector.







10. Remove the ignition coil.

Installation







1. To install, reverse the removal procedure.