Service Port HVAC: Description and Operation

The high-pressure service gauge port valve is located on the A/C receiver drier manifold and tube assembly

The low pressure service gauge port valve is located on the manifold of the A/C compressor manifold and tube assembly at the A/C compressor.

Component Location:

The fitting is an integral part of the refrigerant line or component.
- Special couplings are necessary for both the high side and low side service gauge ports.
- A new Schrader-type valve can be installed if the seal leaks
- Always install the A/C charging valve cap on the service gauge port valves after repairing the refrigerant system.