Seat Belt Height Adjuster: Service and Repair

Removal
1. Position front seat forward for access.
2. Remove battery cover and disconnect ground cable from battery terminal. Refer to 'Battery, Battery Cable.' Negative
3. Remove seat belt upper anchor.
4. Remove 'B' post trim. Refer to 'Body and Frame, Interior Trim, Trim Panel.' Service and Repair






5. Slacken and remove seat belt height adjuster securing bolts and remove adjuster from 'B' post.







6. Remove fibre washers, spacers and bolts from height adjuster.







Installation
1. Fit securing bolts, spacers and fibre washers to height adjuster.
2. Position adjuster on 'B' post and fit and tighten securing bolts.
3. Fit 'B' post trim pad. Refer to 'Body and Frame, Interior Trim, Trim Panel.' Service and Repair
4. Fit seat belt upper anchor.
5. Connect ground cable to battery terminal and fit battery cover. Refer to 'Battery, Service and Repair, Battery Reconnection Procedure.' Service and Repair