Selector Indicator Module

Selector Indicator Module

Removal





1. Disconnect battery ground cable.
Remove the battery cover.
2. Remove the selector lever knob.
3. Remove the J-gate surround.
4. Remove the console finisher veneer panel.





5. Remove the selector indicator module screws.





6. Remove the selector indicator module.
Free the D to 4 switch harness multiplug from the mounting bracket and disconnect the multiplug.
Displace the P switch multiplug from the mounting bracket.
Route the D to 4 harness from under the P switch harness.

Installation
1. Installation is the reverse of the removal procedure
2. Connect the battery and fit the battery cover.
Reset the radio and the clock.