Passenger Side

Blower Assembly - Passenger Side

Removal
1. Remove instrument panel. Service and Repair







2. Remove passenger footwell duct.
- Remove nut.







3. Disconnect harness connector from blower assembly.
1. Detach connector from mounting.
2. Disconnect connector.
3. Discard cable ties.







4. Remove fasteners securing duct to heater/cooler unit.
- Remove screws.







5. Remove duct connecting blower to heater/cooler unit.
- Remove screws.
- Remove duct.







6. Remove blower assembly.
1. Slacken nut.
2. Slacken bolt ('A' post side), remove remaining bolt.
- Remove blower.

Installation
1. Installation is a reversal of the removal procedure.







2. Tighten nuts to specification.
1. 5-7 Nm.
2. 5-7 Nm.