Front Seat Headrest Motor

Removal
1. Power seat fully forward and position squab in fully upright position.
2. Remove front seat back finisher. Service and Repair
3. Remove battery cover and disconnect ground cable from battery terminal. Service and Repair





4. Release and remove seat tensioner spring.





5. Slacken and remove headrest motor securing screws and remove drive cable retaining plate.
6. Withdraw drive cable from motor.





7. Release motor harness multiplug (yellow) from mounting bracket, position motor for access and disconnect multiplug.
8. Remove headrest motor from seat.


Installation
1. Position motor in seat frame, connect harness multiplug and seat multiplug in mounting bracket.
2. Install motor on headrest drive cable and align with mounting bracket.
3. Fit motor securing screws and drive cable retaining plate.
4. Tighten motor securing screws.
5. Install seat tensioner spring.
6. Fit seat back finisher. Service and Repair
7. Connect ground cable to battery terminal and fit battery cover. Service and Repair