Vanity Lamp: Service and Repair

Removal
1. Release sun visor from retention bezel to isolate from electrical supply.







2. Move sun visor to downward position and turn mirror cover upwards.







3. Using a small screwdriver, carefully release illumination lens tangs from vanity assembly.







4. Supporting vanity assembly, slacken and remove securing screws and remove assembly from sun visor.

Installation
1. Ensure that bulb holders and switch contacts are correctly positioned and seated.
2. Position and fully seat vanity assembly on sun visor and fit and tighten securing screws.
3. Fit and fully seat mirror illumination lenses.
4. Turn mirror cover downwards.
5. Reposition sun visor in retention bezel and return to upward position.