E9: Signal Ground/Continuity

With EM010 and EM014 disconnected, measure the resistance between EM010/023 and chassis ground EM008L

- Is the resistance < 0.5 ohms?
Yes
GO to E10 E10: Signal Ground 2 Continuity
No
Inspect harness/connector EM010 for corrosion, damage, or pushed back pin.
Inspect ground stud EM008L for corrosion or damage.
Inspect harness/splice EMS36 for damage.
Repair as required and reconnect plug(s).
GO to E11 E11: Stop