Engine Table
| Cylinder head bolt | 59 - 61 Nm SPS SPS System (+90 degrees and non-reuseability). Discard fixings on removal and replace with new bolts / nuts every time a 'strip down' is carried out. Refer to Engine, Service and Repair, Service Procedures, SPS Joint Control System and Sealants. |
| Cylinder head bolt Refer to Cylinder Head Gasket, Service and Repair. | Sequence |
| Intake manifold | 21.5 - 28.5 Nm |
| Camshaft Bearing Cap to Cylinder Head Refer to Camshaft, Service and Repair for sequences and servicing notes. | 17 - 23 |
| Camshaft Coupling Bolt | 22 - 28 |
| Main bearing cap | 136 - 142 Nm SPS SPS System (+90 degrees and non-reuseability). Discard fixings on removal and replace with new bolts / nuts every time a 'strip down' is carried out. Refer to Engine, Service and Repair, Service Procedures, SPS Joint Control System and Sealants. |
| Connecting rod nuts and bolts | 52 - 55 Nm SPS SPS System (+90 degrees and non-reuseability). Discard fixings on removal and replace with new bolts / nuts every time a 'strip down' is carried out. Refer to Engine, Service and Repair, Service Procedures, SPS Joint Control System and Sealants. |
| Crankshaft damper/pulley bolt | 183 - 223 |
| Drive-plate to crankshaft | 123 - 149 Nm |
| Oil pump and pump carrier | 21.5 - 28.5 Nm |
| Exhaust manifold to cylinder head | 44.5 - 59.5 Nm |
| Coolant pump assembly | 21.5 - 28.5 |