Connecting Rod, Engine
| Connecting rod | Length between centers | 166.320 - 166.420 mm |
| Bore for large end bearing | 56.731 mm | |
| Bearing diametrical clearance | 0.023 - 0.059 mm | |
| Bearing side clearance | 0.132 - 0.233 mm | |
| Bore for small end bushing | 26.975 - 27.000 mm | |
| Connecting rod nuts and bolts | 52 - 55 Nm SPS SPS System (+90 degrees and non-reuseability). Discard fixings on removal and replace with new bolts / nuts every time a 'strip down' is carried out. Refer to Engine, Service and Repair, Service Procedures, SPS Joint Control System and Sealants. |