Door Open Warning Lamp (Active Low)

1. Close all four doors and turn ignition to ON.
2. Open each door in turn, checking that lamp illuminates.
3. On identification of non-illumination, check continuity across suspect door switch, door closed - switch open circuit, door open - switch short circuit.
4. If switch tests correctly check continuity from pack connector to the relevant door switch (see table below for pin numbers).

Door Pack pin connection Switch connection
Driver 46, 48-way 06
Passenger - front 47, 48-way 18
Passenger - rear left 47, 48-way 6L
Passenger - rear right 47, 48-way 6R

Door Open Warning, Fig.1:

1. Instrument pack
2. Driver's door ajar switch
3. Passenger door ajar (front)
4. Passenger door ajar (RH rear)
5. Passenger door ajar (LH rear)