Armset Support, Renew

Fig. 1:

Front door:
- Remove front door trim pad veneer panel.
- Remove upper trim pad and lower trim pad.
- Using a suitable plastic knife, cut through the weather-shield to door sealant and reposition weathershield for access.
- Drill out rivets and remove retaining screws from front and rear armrest support brackets.
- Remove bracket.

Reardoor:
- Remove front door trim pad veneer panel.
- Remove upper trim pad and lower trim pad.
- Remove door arm rest.
- Using a suitable plastic knife, cut through the weather-shield to door sealant and reposition weathershield for access.
- Drill out and remove arm rest rear mounting bracket securing pop rivets.
- Remove bracket.
- Drill out and remove arm rest front mounting bracket securing pop rivets.
- Remove bracket (Fig.1).

Refit in the reverse order of the removal procedure.