Hood Latch Release Cable: Service and Repair

Fig. 1:

- Slacken the clamp bolt securing the cable to the lock actuator.
- Disconnect the cable from the lock and from the mounting clip.
- Release the cable from the bulkhead mounting clips and remove the tie wraps securing the cable to the pipes and harnesses.
- Remove the cable from the remaining large tie wraps.
- Open the front door.
- Remove the underscuttle pad.
- Pull the release handle and disconnect the cable from the release handle and bracket.
- Pull the cable (Fig.1) through the bulkhead grommet and discard.

Refit in the reverse order of the removal procedure.