Intermediate Pipe-RH
INTERMEDIATE PIPE - RHRENEW
Drive the car onto a ramp. Raise the ramp.
Remove the RH intermediate pipe to silencer clamp securing nut/bolt (3 Fig 1).
Remove the RH intermediate pipe to front pipe clamp securing nut/bolt (1 Fig 2).
Displace and remove the RH intermediate pipe/silencer assembly (2 Fig 2). Remove the sealing olive.
Clean the sealing ring faces, clamps and olives. Smear the RH front pipe olive with sealant.
Fit the olive to the replacement intermediate pipe. Fit and align the intermediate pipe to the front pipe.
Position the clamp over the joints, and partially tighten the clamp nut/bolt.
Smear the RH intermediate pipe olive with sealant. Fit the olive to the pipe.
Smear the RH silencer union with sealant. Fit the silencer to the intermediate pipe. Fit the union clamp over the joints, and partially tighten the clamp nut/bolt. Align the exhaust system, and final tighten all clamp nuts/bolts. Lower the ramp.
Run the engine and check for leaks. Road test the vehicle and check that the exhaust does not foul the underbody, chassis, etc. Re-align as necessary.
DATA
TORQUE FIGURES
Exhaust clamp nuts/bolts 15-18Nm
SPANNER SIZES
1/2AF
OILS/LUBRICANTS/SEALANTS
Exhaust sealer TIVOLI KAY ADHESIVES No 5696