Removal and Installation

TIRE PRESSURE RECEIVER

Removal and Installation


REMOVAL

1.Remove the instrument lower cover. Refer to "A/T MODELS : Exploded View" Exploded View A/T Models (A/T) or {LINK_TO:0000000008163258}, "M/T
MODELS : Exploded View" (M/T).
2.Remove the glove box assembly.
3.Remove the instrument lower panel RH.
4.Disconnect tire pressure receiver harness connector.
5.Remove Tire pressure receiver mounting screw.
6.Remove tire pressure receiver.

INSTALLATION

Install is the reverse order of removal.