For Mexico

EVAP LEAK CHECK

Inspection

1.Visually inspect EVAP vapor lines for improper attachment and for cracks, damage, loose connections, chafing and deterioration.





2.Check EVAP canister as follows:
a.Block port (B). Orally blow air through port (A).
Check that air flows freely through port (C).
b.Block port (A). Orally blow air through port (B).
Check that air flows freely through port (C).





3.Inspect fuel tank filler cap vacuum relief valve for clogging, sticking, etc.
a.Wipe clean valve housing.





b.Check valve opening pressure and vacuum.





c.If out of specification, replace fuel filler cap as an assembly.
Refer to "Exploded View" Exploded View.
4.Check water separator as follows:
a.Check visually for insect nests in the water separator air inlet.
b.Check visually for cracks or flaws in the appearance.
c.Check visually for cracks or flaws in the hose.





d.Check that A and C are not clogged by blowing air into B with A, and then C plugged.
e.In case of NG in items 2 - 4, replace the parts.
NOTE:
Do not disassemble water separator.