Inspection After Removal

FRONT WHEEL HUB AND KNUCKLE

Inspection


INSPECTION AFTER REMOVAL

Check components for deformation, cracks, and other damage. Replace if necessary.
Ball Joint Inspection
Check boots of transverse link and steering outer socket ball joint for breakage, axial play, and torque. Refer to
"Inspection" Component Tests and General Diagnostics and "2WD : Inspection" Inspection.

INSPECTION AFTER INSTALLATION

- Check wheel sensor harness for proper connection. Refer to "FRONT WHEEL SENSOR : Exploded View" Exploded View.
- Check wheel alignment. Refer to "Inspection" Front Suspension.
- Adjust neutral position of steering angle sensor. Refer to "ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION : Special Repair Requirement" Special Repair Requirement.