Work Procedure

ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT

Work Procedure


1. PERFORM INITIALIZATION WITHOUT CONSULT

Perform initialization without CONSULT. Refer to "Work Procedure" Work Procedure.
- GO TO 2.

2. PERFORM INITIALIZATION FOR FRONT POWER WINDOW

Perform initialization for front power window. Refer to "ADDITIONAL SERVICE WHEN REMOVING BATTERY NEGATIVE TERMINAL : Special Repair Requirement" Special Repair Requirement.
- GO TO 3.

3. PERFORM INITIALIZATION WITH CONSULT

Perform initialization with CONSULT. Refer to "Work Procedure" Work Procedure.
- GO TO 4.

4. CHECK RETRACTABLE HARD TOP OPERATION

Check retractable hard top operation.
Is the inspection result normal ?
YES- WORK END
NO- GO TO 1.