Removal And Installation

AIR BREATHER HOSE

VK56VD (2WD) : Removal and Installation


REMOVAL

1.Remove exhaust front tube. Exploded View.
2.Remove clips of A/T air breather hose from brackets.
3.Remove air breather box from bracket.
4.Remove air breather box from A/T air breather hose.
5.Remove A/T air breather hose from A/T air breather tube.
6.Remove bolt fixing A/T assembly to engine assembly with a power tool.
7.Remove bracket.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
- Never bend the A/T air breather hose to prevent damage to the hose.
- Insert A/T air breather hose to A/T air breather tube all the way to the curve of the tube.
- Be sure to insert it fully until its end reaches the stop when inserting A/T air breather hose to air breather box.
- Install A/T air breather hose to air breather box so that the paint mark is facing backward.
- Securely install the clips to the brackets when installing A/T air breather hose to the brackets.