Kicking Plate Outer

BODY SIDE TRIM

KICKING PLATE OUTER : Removal and Installation


CAUTION:
- When removing, always use a remover tool that is made of plastic.
- Never damage the body.

REMOVAL

FRONT KICKING PLATE OUTER





1.Insert a remover tool (A) between front kicking plate outer and body panel to disengage pawls.
2.Pull up front kicking plate outer to remove.





REAR KICKING PLATE OUTER





1.Insert a remover tool between rear kicking plate outer and body panel to disengage pawls.
2.Pull up rear kicking plate outer to remove.






INSTALLATION

Note the following item, and then install in the reverse order of removal.

CAUTION:
Check that pawls are securely fitted in panel holes on body when installing, and then press pawls in.