Inspection And Adjustment

FRONT SUSPENSION MEMBER

Inspection and Adjustment


ADJUSTMENT BEFORE REMOVAL

Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 1).

INSPECTION AFTER REMOVAL

Check the front suspension member for significant deformation, cracks, or damages. Replace if necessary.

INSPECTION AFTER INSTALLATION

1.Check wheel sensor harness for proper connection. Exploded View.
2.Check wheel alignment. Front Suspension.
3.Adjust neutral position of steering angle sensor. (Without 4WAS) Work Procedure.
4.Adjust neutral position of 4WAS front actuator. (With 4WAS) Work Procedure (Pattern 2).