Without Distance Control Assist System

ACCELERATOR CONTROL SYSTEM

MODELS WITHOUT DISTANCE CONTROL ASSIST SYSTEM : Removal and Installation


REMOVAL

1.Remove the bolt cap and the inside mounting bolt.
2.Remove accelerator pedal assembly.
3.Disconnect accelerator pedal position sensor harness connector.

CAUTION:
- Never disassemble accelerator lever. Never remove accelerator pedal position sensor from accelerator lever.
- To prevent damage to the parts, never give an impact (e.g. drop) to the accelerator pedal assembly.
- To prevent damage to the parts, keep accelerator lever away from water.

INSTALLATION

Installation is the reverse order of removal.