Hybrid Battery System

DIAGNOSIS SYSTEM (LBC)

CONSULT Function


APPLICATION ITEM

CONSULT performs the following functions via CAN communication with Li-ion battery controller (LBC).






Work Support







ECU IDENTIFICATION

Part number of LBC can be checked.

SELF-DIAGNOSIS RESULT

Self Diagnostic Item
Regarding items of DTC, Testing and Inspection.
How to Read DTC and 1st Trip DTC
DTCs and 1st trip DTCs related to the malfunction are displayed in "Self-diag results".
- When LBC detects a 1st trip DTC, "1t" is displayed for "TIME".
- When LBC has detected a current DTC, "0" is displayed for "TIME".
- If "TIME" is neither "0" nor "1t", the DTC occurred in the past and LBC shows the number of times the vehicle has been driven since the last detection of the DTC.
How to Erase DTC and 1st Trip DTC
NOTE:
If the ignition switch stays ON after repair work, be sure to turn ignition switch OFF once. Wait at least 10 seconds and then turn it ON (engine stopped) again.
1.Select "HV BAT" with CONSULT.
2.Select "SELF-DIAG RESULTS".
3.Touch "ERASE". (DTC in LBC will be erased.)

FREEZE FRAME DATA (FFD)

The following vehicle status is recorded when DTC is detected and is displayed on CONSULT.







DATA MONITOR








ACTIVE TEST