Removal and Installation

COOLING FAN

Removal and Installation


REMOVAL

1.Remove air cleaner case (bank 1) and air duct (inlet). Service and Repair.
2.Remove reservoir tank and drain hose. Exploded View
3.Disconnect harness connector from heater pump.
4.Disconnect harness connector from cooling fan control module, and move harness to aside.
5.Remove harness clips from fan shroud.





6.Remove A/C high pressure pipe bracket bolt (1).





7.Remove cooling fan assembly from upper the vehicle.

CAUTION:
Never damage or scratch on radiator core.

INSTALLATION

Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent core support from being damaged).