Removal and Installation

REAR DOOR LOCK

DOOR LOCK : Removal and Installation


REMOVAL

1.Remove rear door finisher. Rear Door Finisher.
2.Remove sealing screen. Removal and Installation.
3.Remove rear door sash inner cover. Rear Door Sash Inner Cover.
4.Remove rear door corner outer cover. .
5.Remove rear door sash and rear door glass. Removal and Installation.
6.Remove outside handle and outside handle bracket. Service and Repair.
7.Remove door lock assembly mounting TORX bolts.
8.Disconnect door lock actuator connector, and then remove door lock assembly.

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
Check door open/close, lock/unlock operation after installation.