Removal and Installation

FRONT DOOR LOCK

DOOR LOCK : Removal and Installation


REMOVAL

1.Remove front door finisher. Front Door Finisher.
2.Remove front door glass. Removal and Installation.
3.Remove front door module assembly. Removal and Installation.
4.Remove outside handle and outside handle bracket. Service and Repair.
5.Remove door lock assembly mounting TORX bolts.
6.Disconnect door lock actuator connector, and then remove door lock assembly.
7.Remove key rod from door lock assembly.

INSTALLATION

Note the following item, and install in the reverse order of removal.

CAUTION:
- When installing each rod, rotate rod holder until a click is felt.
- Check door open/close, lock/unlock operation after installation.