P33F1

DTC Logic


DTC DETECTION LOGIC

NOTE:
If DTC "P33F1" is displayed with DTC "UXXXX", first perform the trouble diagnosis for DTC "UXXXX".






DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

WITH CONSULT
1.Turn ignition switch ON and wait at least 5 seconds.
2.Select "Self Diagnostic Result" mode of "HV BAT" using CONSULT.
Is P33F1 detected?
YES- .
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM SELF-DIAGNOSIS

WITH CONSULT
1.Perform "All DTC Reading" with CONSULT.
2.Check "Self Diagnostic Result".





- Replace a malfunctioning part corresponding to the control module detecting DTC.