P30FC

DTC Logic


DTC DETECTION LOGIC

NOTE:
If DTC "P0AC0", "P0AC1" or "P0AC2" is displayed with DTC "P30FC", first perform the trouble diagnosis for
DTC "P0AC0", "P0AC1" or "P0AC2".






DTC CONFIRMATION PROCEDURE


1. PERFORM DTC CONFIRMATION PROCEDURE

WITH CONSULT
1.Select "DATA MONITOR" mode of "HV BAT" using CONSULT."
2.Drive the vehicle, according to driving pattern B.


Is P30D0 detected?
YES- P30D0.
NO- INSPECTION END


Diagnosis Procedure


1. PERFORM SELF-DIAGNOSIS-1

WITH CONSULT
1.Perform "All DTC Reading" with CONSULT.
2.Check if the DTC is detected in "Self Diagnostic Result" of "EV/HEV".
Is DTC detected?
YES- Perform diagnosis procedure of applicable DTC. Testing and Inspection.
NO- GO TO 2.

2. PERFORM SELF-DIAGNOSIS-2

WITH CONSULT
1.Select "Self Diagnostic Result" mode of "HV BAT" using CONSULT.
2.Check if the DTC is detected in "Self Diagnostic Result" of "HV BAT".
Is DTC detected?
YES- After perform diagnosis procedure of applicable DTC, GO TO 3.
NO- GO TO 3.

3. PERFORM DTC CONFIRMATION PROCEDURE

Perform DTC confirmation procedure. .
Is DTC detected?
YES- GO TO 2.
NO- INSPECTION END